SSHRG

Order
These connectors  are intended for AC, DC (frequency up to 3MHz) and with  voltage up to 850V(as peak).

Equipment mounted  half  of  these connectors is manufactured w/o junction pipes,cable mounted part with straight or angled junction pipe.

Type of mating: threaded connection.

Shell polarization: one-key.

Contact plating: silver.

Connectors of SSHRG type,hermetic equipment-mounted plugs(sockets) are mated with  SSHR or 2RTT sockets(plugs) this is valid for shells(2120,28) manufactured under Technical Conditions GE0.364.120 TU.

These connectors assigned for wiring with shielded cable.

SSHRG connectors manufactured for internal  mounting for cold and moderate climatic areas(UCHL) in compliance with Technical Conditions ASLR.434410.017ТU(ASHDK.434410.086TU.

Plugs and sockets are intermateable with SSHR and SSHRG sockets(males) manufactured under Technical Conditions GE0.364.107TU and GE0.364.108TU respectively.
Specifications
  • Total number of contacts:
    2, 3, 4, 7, 10, 15, 20, 26, 30, 45, 50
  • Operational current per contact from, A:
    10
  • Operational current per contact to, A:
    25
  • Peak operating voltage,V:
    850
  • Plug(male) or socket(female):
    Plug(male)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted
  • Сonnector rear design:
    W/o junction pipe
  • Hermetic or nonhermetic:
    Hermetic
  • Shielded or unshielded:
    Shielded
  • Type of mating:
    Thereaded connection
  • Number of mating:
    200
  • Operating ambient temperature from, °C:
    -60
  • Operating ambient temperature to, °C:
    70
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring:
    Internal
  • Hermetic, air leakage allowed or not allowed:
    Allowed