SSHR

Order
These connectors are intended for AC, DC (frequency up to 3MHz) and with  voltage up to 850V(as peak).

Nonhermetic SSHR connectors consist of two halves: plug(male) and socket(female) Plugs and sockets can be both equipment and cble mounted.

Equipment mounted  half  of  these connectors is manufactured w/o junction pipes,cable mounted part with straight or angled junction pipe.

Type of mating: threaded connection.

One key shell polarization.

Contact plating: silver.

These connectors are assigned for wiring with shielded cable(wire).

The connectors designed for internal wiring for cols and moderate climatic conditions (UCHL)  in compliance with Technical Specifications  АSLR.434410.019ТU (АSHDK.434410.079ТU).

These plugs and sockets are intermateable with SSHR and SSHRG plugs and sockets  manufactured under Technical Conditions GE0.364.107TU and GE0.364.108TU respectively.
Specifications
  • Total number of contacts:
    4, 10, 15, 20, 26, 30, 45, 50
  • Operational current per contact from, A:
    10
  • Operational current per contact to, A:
    25
  • Peak operating voltage,V:
    850
  • Plug(male) or socket(female):
    Plug(male) ,socket(female)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted, cable mounted
  • Сonnector rear design:
    W/o junction pipe,straight, angled
  • Hermetic or nonhermetic:
    Nonhermetiс
  • Shielded or unshielded:
    Shielded
  • Type of mating:
    Thereaded connection
  • Number of mating:
    500
  • Operating ambient temperature from, °C:
    -60
  • Operating ambient temperature to, °C:
    70
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring:
    Internal