SHR connectors designed for use in DC, AC(frequency up to 3MHz)  and with  voltage up to 850V(as peak).

The equipment mounted part of the connector is manufactured  without junction pipe  with straight or angled junction pipe, the cable mounted part is manufactured with straight or angled junction pipes.

These connectors consist of two parts:plug(male) and socket(female).Plugs and sockets can be both  equipment and cable mounted.

Type of connector mating: threaded connection.

One key shell polarization.

Contact plating: silver.

These connectors are assigned for wiring with shielded or unshielded cable(wires) dependent on the end nut type of the junction pipe.

The connectors designed for internal  and external(provided a consumer would protect them against dust and water)wiring for cols and moderate climatic conditions (UCHL)  in compliance with Technical Specifications  NKTsS.434410.504TU

SHR connectors manufactured under NKTsS.434410.504TU (NKTsS.434410.111TU)are intermateable with SHR connectors manufactured under GE0.364.107TU as well as with 2RT-A connectors manufactured under ГЕ0.364.118ТU and 2RTT manufactured under GE0.364.120 TU(ASHDK.434410.060TU).
  • Total number of contacts:
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 20, 23, 26, 30, 31, 45, 47
  • Operational current per contact from, A:
  • Operational current per contact to, A:
  • Peak operating voltage,V:
  • Plug(male) or socket(female):
    Plug(male) ,socket(female)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted, cable mounted
  • Сonnector rear design:
    W/o junction pipe,straight, angled
  • Hermetic or nonhermetic:
  • Shielded or unshielded:
  • Type of mating:
    Thereaded connection
  • Number of mating:
  • Operating ambient temperature from, °C:
  • Operating ambient temperature to, °C:
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring: