These connectors are dust and splash-proof and designed for use in DC, AC(frequency up to 3MHz) and with voltage up to 850V(as peak).

These connectors consist of two halves: male(plug) and female(socket) The plugs and the sockets can be both equipment or cable mounted.

The equipment mounted part of the connector is manufactured without juncton pipe or with straight or angled junction pipe, the cable mounted part is manufactured with straight or angled junction pipes.

Type of mating: threaded connectors.

Shell polarization: one-key type.

Contact plating: silver.

The connectors are manufactured for wiring with shielded or unshielded cables(wires) dependen on the type of end nut of the junction pipe.

The connectors designed for internal wiring and has modification V(for all climatica areas) in compliance with technical specifications GE0.364.120TU.(АSHDK.434410.060ТU).

The connectors 2RTT under GE0.364.120TU (АSHDK.434410.060ТU) are developed based on 2RT-A and SHR connectors and are intermateable with SHR connectors designed under GE0.364.107 TU,NKTsS 434410.504 TU (NKTsS.434410.111ТU) and 2RТ-А under ГЕ0.364.118ТU.

  • Total number of contacts:
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 20, 23, 26, 30, 31, 45, 47
  • Operational current per contact from, A:
  • Operational current per contact to, A:
  • Peak operating voltage,V:
  • Plug(male) or socket(female):
    Plug(male) ,socket(female)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted, cable mounted
  • Сonnector rear design:
    W/o junction pipe,straight, angled
  • Hermetic or nonhermetic:
  • Shielded or unshielded:
  • Type of mating:
    Thereaded connection
  • Number of mating:
  • Operating ambient temperature from, °C:
  • Operating ambient temperature to, °C:
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring: