These connectors designed for use in DC, AC(frequency up to 3MHz) voltage.

These connectors consist of two halves: equipment and cable mounted plugs ( sockets).

The equipment mounted part of the connector is manufactured without juncton pipes or with straight junction pipes, the cable mounted part is manufactured w/o junction pipes or with straight or angled junction pipes.

Type of mating: threaded connectors.

Shell polarization: one-key type.

Contact plating: gold or silver.

The connectors are manufactured for wiring with shielded or unshielded cables(wires) while doing so(depended on the type of cable) the type of end nut of the junction pipe is changed.

СThese connectors are intended for internal mounting and for all climatic areas in compliance with technical conditions GEO.364.126TU(ASHDK 434410.062TU).

The connectors 2RMT and 2RMDT have different layouts of contacts and are not intermateable.

  • Total number of contacts:
    4, 7, 8, 10, 19, 20, 22, 24, 32, 45, 50
  • Operational current per contact from, A:
  • Operational current per contact to, A:
  • Peak operating voltage,V:
  • Plug(male) or socket(female):
    Plug(male) ,socket(female)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted, cable mounted
  • Hermetic or nonhermetic:
  • Shielded or unshielded:
  • Type of mating:
    thereaded connection
  • Number of mating:
  • Operating ambient temperature from, °C:
  • Operating ambient temperature to, °C:
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring:
    W/o junction pipe,straight, angled