Low-frequency and hermaphroditic (combined) connectors designed for use in DC, AC(frequency up to 3MHz) and pulse current under voltage up to 400V(peak voltage) in high-frequency circuits up to 10MHz and volage under 100V(peak voltage).

Depended on its mating type the connectors are manufactured in two options: cut-in connectors or the connectors equipped with a screw lock.

The cut-in connectors consist of equipment-mounted plug and equipment-mounted socket.

Cable plugs are manufactured with mold –pressed metallic backshell; equipment-mounted sockets-w/o backshell equipped with a screw holding device.

Contact plating: gold and silver –plated for low frequency (LF) connectors, silver-plated for high-frequency (HF) connectors.

The connectors RP15 designed for internal wiring and has modification V(for all climatica areas) in compliance with technical specifications NKTsS.434410.509ТU and ensure interchangeability for the connectors RP-15 manufactured under GE0.364.160TU.

Please, guide with NKTsS 434410.509RE in implementation,operation and installation of the connectors.

  • Total number of contacts:
    9, 10, 14, 15, 23, 32, 36, 50
  • Operational current per contact from, A:
  • Operational current per contact to, A:
  • Peak operating voltage,V:
  • Plug(male) or socket(female):
    Plug(male) ,socket(female)
  • Equipment(fixed) or cable mounted(free):
    Equipment mounted, cable mounted
  • Сonnector rear design:
    W/o junction pipe,straight
  • Hermetic or nonhermetic:
  • Shielded or unshielded:
  • Type of mating:
    Cut-in connection
  • Number of mating:
  • Operating ambient temperature from, °C:
  • Operating ambient temperature to, °C:
  • Method of wiring:
    Three-dimensional(point-to-point), solder mount
  • Wiring: